Elcometer 415 Paint & Powder Coating Thickness Gauge

This easy to use, low cost gauge provides a simple, accurate and reliable way to measure coatings on smooth ferrous (steel) and non-ferrous (aluminium) substrates.

This gauge with it’s intuitive menu allows you to use it straight out of the box.

Elcometer 415 Paint & Powder Coating Thickness Gauge 1

Elcometer 415 Paint & Powder Coating Thickness Gauge 2

Range	0 to 1000 µm (0 to 40 mils)
Accuracy	±3% to ±3 µm (±0.12 mils)
Resolution	1 µm (0.1 mils)
Measurement Speed	Greater than 60 readings per minute
Weight	130g (4.1 oz)
Dimensions	110 x 75 x 35 mm (4.3 x 3 x 1.38”)
Operating Temperature (ambient)	0⁰ to 50⁰C (32⁰ to 120⁰F)
Maximum Operating Temperature (probe)	80⁰C (176⁰F)
Storage Temperature	-10⁰ to 55⁰C (14⁰ to 130⁰F)
Case	High impact ABS Plastic
Batteries	2 x LR03 (AAA) alkaline dry batteries or rechargeable equivalents (supplied)
Packing List	Paint & Powder Gauge: Elcometer 415 gauge, 4 x check foils (50, 125, 500 & 1000μm / 2, 5, 20 & 40 mils), soft carry case, batteries and operating instructions Automotive Gauge: Elcometer 415 gauge, 4 x check foils (25, 75, 125 & 250μm / 1, 3, 5 & 10 mils), ferrous checkpiece, non-ferrous checkpiece, soft carry case, batteries and operating instructions

Fast and accurate reading rate: Greater than 60 readings per minute.
Large, easy to read display: The angled, ‘enlarged’ display is ideal for viewing from all angles. Simple ‘zero cal’ feature: Complete with factory calibration reset if no access to the uncoated substrate.
Auto switches to Ferrous or Non-Ferrous: Ideal for measuring paint or powder on both steel and aluminium surfaces.
Metric or Imperial measurements: Readings can be displayed in microns or mils. Bigfoot™ probe for repeatable results: Integral probe with V-groove allows accurate positioning on smooth, flat surfaces.
Ergonomic design for maximum comfort: Easy to hold gauge allows for regular daily use.
On-screen instructions: The User is guided through the functions of the gauge - in over 20 languages.
Rugged & Reliable: Built from ABS plastic, this durable gauge is ideal for the paint & powder coating environment.

Ferrous Coating Thickness Standards, 2 Values (50 & 250μm / 2 & 10mil) with Zero Plate;
Ferrous Coating Thickness Standards, 4 Values (50, 150, 250 &
500μm / 2, 6, 10 & 20mil) with Zero Plate;
Non-Ferrous Coating Thickness Standards, 2 Values (50&125μm/ 2&5mil) with Zero Plate;
Non-Ferrous Coating Thickness Standards, 4 Values (40, 75, 125 & 175μm / 1.6, 3, 5 & 7mil) with Zero Plate;
Ferrous Checkpiece;
Non-Ferrous Checkpiece;
Foil: 25μm / 1mil;
Foil: 50μm / 2mil;
Foil: 75μm / 3mil;
Foil: 125μm / 5mil;
Foil: 250μm / 10mil;
Foil: 500μm / 20mil;
Foil: 1000μm / 40mil.