EcoGun AS AUTO Mini FS

The EcoGun AS AUTO Mini FS is the answer to painting small areas, for dot marking and gluing. It is equipped with an internal air regulation and therefore only requires an „on-off“-impulse via a control valve. This enables easy integration into automated systems.

An optionally available adapter enables remote control of spray pattern. During the development of the EcoGun AS AUTO Mini FS the aim was to keep it easy to clean and maintain at all times.

Weight	248 g
Material Gun Body	Alumium nickelplated
Parts contacted by media	SST, Al nickel.
Diameter Nozzles	0,6 / 0,8 / 1,0 mm
Connector Fluid	Push-in 6mm
Connector Air	Push-in 6mm
Connector Air, control	Push-in 6mm
Switching Frequency max.	120 per min.
Recom. Air Pressure	3,0 bar (44 psi)
Air Consump. @recom. Air Press	92 Nl/min (3,2 sft³/m)
Pilot Air Pressure max.	5,0 bar (73 psi)
Atomizing Air Press. max.	3 bar (44 psi)
Fluid Pressure max.	1,5 bar (22 psi)
Operating temperature min	2 °C (36 °F)
Operating temperature max	55 °C (131 °F)
ATEX Marking	Ex II 2G T6 X