Electronic dosing system EcoDose 2K

The EcoDose 2K is an electronic dosing system suitable for high and low pressure applications. It can be used in manual and automatic processes. Optimized for quick color changes and easy flushing, it enhances resource utilization and contributes to higher application efficiency. Fluids are measured consistently and precisely, even media with different viscosities. Typical fluids handled are 1 or 2K materials, water and solvent based paints, varnishes, lacquers and monolayer paints.

Weight	130 kg
Type Mixer	Static
Connector Inlet	G 1/8“
Connector Outlet	G 1/4“
Connector Air	G 3/8“
Rated Power	0,3 kW
Pressure Air	5,5 - 8,0 bar (79 - 116 psi)
Fluid Pressure Inlet min.	1,0 bar (14,5 psi)
Fluid Pressure Inlet max.	20,0 bar (290,0 psi)
Flow rate Fluid	0 - 6 l/min (0 - 0,26 gal/m)
Ratio	1:1 - 30:1
On-Ratio Accuracy	1,0 %
Material Temperature Range	15 - 40 °C (59 - 104°F)
Viscosity min.	20 mPa.s
Viscosity max.	500 mPa.s
Ex Zone Fluid Section	Ex II 2G IIA T6
Protect. Class Switch Cabinet	IP55

Stated fluid pressure inlet and viscosity based on low pressure version. High pressure version: 20-200bar (290-2900psi), 250-1200m.Pas

Catalyst ratio, viscosity and flowrate depending on application.

Flow rate measuring by Coriolis or gear flowmeter
Exact volume controlled dosing of both components
High and constant mix accuracy
Monitoring of all dosing functions such as pot life, catalysis ratio and components A & B with dedicated alarm
Automatic color change controlled by volume
Independent flushing circuits for both components
No premixing chamber
Smooth start-up procedure
Intuitive user interface for quick programming of individual settings
High process reliability
Tested according to Dürr quality standards
ATEX fluid section Ex II 2G IIA T6