Elcometer 456 with Built-in Probe
Elcometer 456 with-in proble, is ideal for operationwith one hand. Bigfoot ™ probe type provide betterstability measurements on flat surfaces and curves.
S and T models are equipped with Bluetooth ® device to facilitate the transfer of the computer and PDA. The devices also have RS232 data output, and for trips usingan optional cable.
Fast reading rate |
+ 70 readings per minute |
Display information |
2.4" (6cm) QVGA colour TFT display, 320 x 240 pixels |
Battery Type |
2 x AA dry cell batteries, rechargeable batteries can also be used |
Battery Life |
Approx. 24 hours of continuous use with alkaline, 1 reading per second |
Minimum thickness of the substrate |
Ferrous: 0.3 mm Nonferrous: 0.1 mm, only if there is a special calibration adjustment |
Operating Temperature |
-10? to 50?C |
Dimensions |
140 x 73 x 37 mm |
Weight (including) |
154 g |
+ when the Bluetooth option is disabled
- Ease of Use: Intuitive menus in multiple languages ??facilitates the use of the device;
- Portable: due to robust construction and ergonomic design, the device can be used in the harshest environments;
- Bluetooth ® data transfer: S and T models are equipped with Bluetooth ®. Now you can immediately transfer data from device to computer or other portable devices without using any cables. All models have Elcometer 456 and RS232output;
- Memory: models with memory can store up to 75,000 readings in up to 999groups;
- PSPC: Continuous monitoring allows the user rule 90/10 after NDFT value,confirming passing / fail-, according to IMO PSPC on the ballast tanks
Ask our experts!